LEXUS IS/RC (XE30/XC10) 2014-2020 - FRONT STRUT W/O ELECTRONIC DAMPER (2 POINTS)

SKU:
UR-TW2-3712
Availability:
USUALLY SHIPS WITHIN 2 BUSINESS WEEKS
$275.00
(2 reviews)
Weight:
4.40 LBS
REFUNDS
See Terms of Use

WARRANTY

Each product comes with a unique serial number found on the silver tag. This is for authentication.

All products are backed by a 5 year manufacturing warranty from the date you received your products. Warranty covers welds and metal snaps. If products are re-powder-coated a color other than our company color of white, warrantying may be on either a case-by-case basis or voided.

If you live in an area that sees snow, warranty is limited to 1 year.

IMPORTANT NOTICE: Vehicles with high mileage, body damage, or old age may have chassis flex that will cause mounting points for bracing to not line up perfectly. Modification may be needed for bracing to line up perfectly.

Current Stock:
Adding to cart… The item has been added

ATTENTION: IF APPLICABLE, PLEASE EXPAND THE ADDITIONAL INFORMATION TAB AT THE BOTTOM OF THIS PAGE BEFORE PURCHASING.

Front Strut Bar - also known as a “front strut tower brace,” this bar connects to the top of the front strut towers, which are usually located in the engine bay, and prevents the chassis from flexing during cornering. It makes the chassis more rigid, resulting in better handling by preventing the strut towers from flexing, also helping with shock tower loads and equally dispersing force through the chassis.

Made from ASTM A500 Grade A (American US Standard Mild Steel)

All materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4MM to 5MM steel plates, while the hollow steel tubes and oval tubes are of 1.2MM to 1.6MM thickness. These materials' thicknesses ensure the bars are rigid and strong to maintain constant geometry at all times, yet safe enough to crumble during an impact.

For more information on the design, check out our knowledge page: https://ultraracing-usa.com/knowledge/

BEFORE VS AFTER

strut-bar-before.gif

BEFORE

Part of the shock from impact transfers to the chassis, causing wheel housing and lower arm deforming.

 

strut-bar-after.gif

AFTER

Once equipped with an Ultra Racing strut bar, the shock from impact will be neutralized on both sides.

WHILE ENTERING A CORNER

strut-bar-corner-before.gif

BEFORE

The weight transfer and force gathers on one side, causing unstable handling and an increase in body roll.

 

strut-bar-corner-after.gif

AFTER

Once equipped with an Ultra Racing strut bar, body roll decreases which evens out weight transfer. The car is now stabilized through turns and has better handling.

FITMENT:
All IS/RC models without the front damper control module.
NOTE:
May not clear OE Electronic damper control.

Reviews

  • 5
    LEXUS IS200T Front Strut (2 Points)

    Posted by Saad on Dec 22nd 2020

    Easy & quick install - everything lines up perfectly and car feels nimble and tight around cornering. Note: Due to the limited space between the hood & engine ... the engine cover is difficult to remove with the strut bar on. I'm sure there's a way but it is a tight fit. Overall very nice built. I would have preferred if the ULTRARACING sticker in the centre was lasered into the bar because due to heat, it is slightly peeling on the edge.

  • 4
    Upper Strut Bar

    Posted by Ravi S on Nov 14th 2020

    This Upper Strut Bar I Order And It Came At. Timely Fashion... i have it installed on a car i use daily and i feel the difference and i will be ordering more products from this site.