MITSUBISHI EVO X (CZ4A) 2008-2016 - FRONT STRUT (3 POINT)
We recommend washers to each mounting point of the hood to slightly raise it. Center mounting point may be slightly off on some vehicles, modifications may be required.
NOTE 2: If you have aftermarket coilover, please use washers before placing nuts.
Made from ASTM A500 Grade A (American US Standard Mild Steel)
Every materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4MM to 5MM steel plates, while the hollow steel tubes and oval tubes are of 1.2MM to 1.6MM thickness. These materials are selected to ensure the bars are rigid and strong to maintain constant geometry at all times, yet safe enough to crumble during an impact for safety reason
All our raw materials has been made and tested with satisfactory result. For more information on the design, check out our knowledge page https://ultraracing-usa.com/knowledge/
Each product comes with a unique serial number found on the silver tag. This is for authentication.
All products are backed by a 5 year manufacturing warranty from the date you received your products. Warranty covers welds and metal snaps. If products are powder coated other then our company colors, warranting may be on case-by-case basis or may void warranty.
If you live in an area that see snow, warranty is limited to 1 years.