HONDA ACCORD (CP/CS) 2008-2012 - FRONT SUBFRAME (2 POINTS)
$236.56
REFUNDS
See Terms of Use
WARRANTY
See Terms of Use
WARRANTY
Each product comes with a unique serial number found on the silver tag. This is for authentication.
All products are backed by a 5 year manufacturing warranty from the date you received your products. Warranty covers welds and metal snaps. If products are re-powder-coated a color other than our company color of white, warrantying may be on either a case-by-case basis or voided.
If you live in an area that sees snow, warranty is limited to 1 year.
MUST READ BEFORE PURCHASING: Bracing has been designed to fit stock vehicles with no aftermarket modifications. Vehicles with high mileage, body damage, or old age may have chassis flex that will cause mounting points for bracing to not line up perfectly. Modification may be needed for bracing to line up perfectly. If you are unsure about fitment, please email us.
ATTENTION: IF APPLICABLE, PLEASE EXPAND THE ADDITIONAL INFORMATION TAB AT THE BOTTOM OF THIS PAGE BEFORE PURCHASING.
The front lower bracing aids in stiffening the front part of the vehicle. With a reinforced chassis, the vehicle can experience better stability and handling when driving. Reinforcing your vehicle’s chassis will also aid in preservation from wear-and-tear as your vehicle ages and accumulates miles.
Made from ASTM A500 Grade A (American US Standard Mild Steel)
All materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4MM to 5MM steel plates, while the hollow steel tubes and oval tubes are of 1.2MM to 1.6MM thickness. These materials' thicknesses ensure the bars are rigid and strong to maintain constant geometry at all times, yet safe enough to crumble during an impact.
For more information on the design, check out our knowledge page: https://ultraracing-usa.com/knowledge/
- Note:
- This unit fits on the rear of the front subframe assembly. Will fit Honda Accord 2005-2008 (CM5 V6 )
- Note:
- Cannot be combined with the 4 point mid brace (URTH-ML4-2793)
Reviews
-
Nice
Bar improved cornering and stiffened the feel in the front end (more control). Install was easy. Put car on stands, used jack to support, sub frame, used impact gun to remove, but probably didn't need the gun, replaced the bolts, then tightened to spec (76 ft/lb). Fast and easy. Was nervous it would rub exhaust, but appeared to leave just enough clearance. No noise from exhaust contacting it. Was also worried it would bottom out, as I have eibach lowering springs (mid lowering model). However, I haven't yet had that issue and I don't think I will. Definitely worth it, considering how easy and affordable it was.
-
HONDA ACCORD (CP) 2008-2012 - FRONT LOWER BACK SUBFRAME
REMEMBER WHEN YOU BUY A CAR THE MANUFACTURER CAN'T PUT IN ALL THE UR PARTS DUE TO MANUFACTURER'S PRICE POINTS. BUT BY ADDING UR PRODUCTS AFTERMARKET YOU'RE ADDING PRODUCTS THAT SHOULD'VE BEEN INCLUDED WITH A NEW CAR IN THE 1ST PLACE.