OPEN BOX - INFINITI G35 (2WD) 2003-2007 - MIDDLE LOWER (4 POINTS)
OPEN BOX - like new, has not been fully opened. (see images)
May not work on aftermarket exhausts.
Does not work with AWD models.
This item ties the Front Lower Control Arm, Front Subframe, to the Front Compression Arm main mounting points.
Item will work on
2003-2006 Infiniti G35; Sedan; RWD Only
2003-2007 Infiniti G35; Coupe; RWD Only
ATTENTION: IF APPLICABLE, PLEASE EXPAND THE ADDITIONAL INFORMATION TAB AT THE BOTTOM OF THIS PAGE BEFORE PURCHASING.
The middle lower bracing aids in stiffening the mid-section of the vehicle. The exhaust/driveshaft tunnel is an area of the vehicle where a lot of chassis flexing occurs. With a reinforced chassis, the vehicle can experience better stability and handling when driving. Reinforcing your vehicle’s chassis will also aid in preservation from wear-and-tear as your vehicle ages and accumulates miles.
Made from ASTM A500 Grade A (American US Standard Mild Steel)
All materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4MM to 5MM steel plates, while the hollow steel tubes and oval tubes are of 1.2MM to 1.6MM thickness. These materials' thicknesses ensure the bars are rigid and strong to maintain constant geometry at all times, yet safe enough to crumble during an impact.
For more information on the design, check out our knowledge page: https://ultraracing-usa.com/knowledge/