ACURA RSX (DC5) 2002-2006 - INTERIOR FLOOR (2 POINTS)
$275.00
(No reviews yet)
Write a Review
ACURA RSX (DC5) 2002-2006 - INTERIOR FLOOR (2 POINTS)
REFUNDS
See Terms of Use
WARRANTY
See Terms of Use
WARRANTY
Each product comes with a unique serial number found on the silver tag. This is for authentication.
All products are backed by a 5 year manufacturing warranty from the date you received your products. Warranty covers welds and metal snaps. If products are re-powder-coated a color other than our company color of white, warrantying may be on either a case-by-case basis or voided.
If you live in an area that sees snow, warranty is limited to 1 year.
IMPORTANT NOTICE: Vehicles with high mileage, body damage, or old age may have chassis flex that will cause mounting points for bracing to not line up perfectly. Modification may be needed for bracing to line up perfectly.
ATTENTION: IF APPLICABLE, PLEASE EXPAND THE ADDITIONAL INFORMATION TAB AT THE BOTTOM OF THIS PAGE BEFORE PURCHASING.
What is an interior floor bar?
Interior floor bars usually connect to the bottom seat belt mounts and wrap behind the front seats. They increase chassis reinforcement and decrease flexing. Interior Floor braces strengthen the most flexible area of the body's frame, the floor pan. This brace helps the lower, mid-section of the vehicle from over flexing. Does your car creak going up and down driveways and over speed bumps? Make you car feel brand new and stronger than before with this brace.
Made from ASTM A500 Grade A (American US Standard Mild Steel)
All materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4MM to 5MM steel plates, while the hollow steel tubes and oval tubes are of 1.2MM to 1.6MM thickness. These materials' thicknesses ensure the bars are rigid and strong to maintain constant geometry at all times, yet safe enough to crumble during an impact.
For more information on the design, check out our knowledge page: https://ultraracing-usa.com/knowledge/
- Installation:
- This part is adjustable. After mounting, tighten the adjuster nuts so that the brace is PULLING INWARD on the body of the car.
- Note:
- If you are unsure about fitment, please email us to verify before you purchase.
